Distributor Login 1425 S. Campus Ave., Ontario CA 91761 - USA
blogspot youtube linkedin facebook instagram google plus
1.888.588.2378 MN - FR: 7AM - 5PM PST
Contact Us     
Category: Poly Bundlers

PP-6030Z + PP-6040M

Up to 15 Packages/min.

Fully Automatic Fully Automatic
Medium Speed Medium Speed
Sleeve Wrapping Machine Sleeve Wrapping Machine
220 VOLTS
3 Phase 97 AMP
POWER
REQUIREMENTS
5 CFM at 80 PSI AIR
REQUIREMENTS
1100 lbs. SHIPPING
WEIGHT
Description / Specifications/ Features/

Model PP-6030Z Automatic In-Line Poly Bundler Sleeve Wrapper with Model PP-6040M Shrink Tunnel. This system is a Fully Automatic In-Line machine with a seal size of 27.5″ W x 16″ H tunnel opening. This system uses 2 single wound rolls of polyethylene film, one located on top of the machine and one located at the bottom of the machine, and these two sheets are sealed together at the center to make one sheet of film that the package will travel through. The package is sealed in a poly film with the ends open, now the package is picked up by the tunnel conveyor belt and automatically transferred into the shrink tunnel where the film will be heated up and will then shrink tightly around the package somewhat closing or reducing the size of the open ends, if enough film is used you can sometimes completely enclose the package ends with compression rollers. Production speeds of 8 to 15 PPM can be obtained depending on package length, film thickness, etc.

  • Speed Up to 15 Packages/Min.
  • Power Requirements 220 Volt 3 PH 97 Amp
  • Air Requirements 5 CFM 80 PSI
  • Shipping Weight 1100 lbs.
  • Machine Dimensions (71.5") x (52.0") x (84.0")
  • Carton Range (28.0") x (18.0") x (8.0")
  • Phase 1
  • Power (W) 37 KW
  • Specifications based on Line Specifications based on PP-6030Z

Specifications based on PP-6030Z

  • 27.5
    27.5" Wide Hot Knife Seal Bar with Safety Switches

  • Maximum width film roll is 25
    Maximum width film roll is 25"

  • 30
    30" Power Belted infeed conveyor

    Includes photo eye activation to transport product into and through product into and through the sealing area

  • 20
    20" powered discharge conveyor

    Used to power the product into the shrink tunnel

  • Independent Seal timer
    Independent Seal timer

  • VFD Drive for conveyor speed control
    VFD Drive for conveyor speed control

  • Easy to use front control panel with digital temperature controls
    Easy to use front control panel with digital temperature controls

  • Dual film rack with independent motor drives
    Dual film rack with independent motor drives

    (one film roll on top and one on bottom)

  • Film threading diagrams
    Film threading diagrams

  • Pneumatic product hold down to stabilize product on discharge conveyor
    Pneumatic product hold down to stabilize product on discharge conveyor

  • Machine speeds of 8 to 20 PPM depending on product size and film gauge used.
    Machine speeds of 8 to 20 PPM depending on product size and film gauge used.

  • Digital seal bar temp control 0-400°F
    Digital seal bar temp control 0-400°F

  • Working Height of 33.5
    Working Height of 33.5" (+-/2")

  • AC Variable speed motor invertors with PLC
    AC Variable speed motor invertors with PLC

Downloads:

The BestPack Advantage

Exclusive Benefits when you choose BestPack

Contact Us Now and see why BestPack is for you!

Request a Quote